Wardrobe Planning: With raumplus - LEGNO System
1 CLOTHES ROD
1 metre of clothes rod can hold up to 25 blouses, shirts, dresses and skirts (40 mm per item of clothing). Allow at least 500 mm shelf depth. incl. plastic pilaster strips
that enable clothes hangers to slide noiselessly on the clothes rod.
Optimum shelf heights are:
1700 mm for long dresses and coats
1200 mm for summer dresses and jackets
1200 mm for shirts and suits
2 TIE RACK DEPTH ADAPTABLE SV
Modern design – adjustable mounting depth! Can accommodate 32 ties. Guiding rail in natural alu-effect, plastic parts in black. Standard mounting depth is 500mm.
3 DRESSING BENCH
The dressing bench is a practical addition to the LEGNO interior system.
4 CLOTHES LEFT
This pull-down clothes lift is ideal for hanging up items of clothing if you want to make full use of higher and less accessible areas of your storage space. Possible shelf widths: 440 mm – 1200 mm. Optimum mounting height: 1000 mm – 1800 mm. Allow at least 500 mm shelf depth. Load capacity of up to 10 kg. Pull-down, pull-out, raumplus is available in two designs for your selection.
5 STORAGE CUBE
Storage cube for hanging in closet storage unit. Supplied preassembled. The top three cubbies have a clear height of approx. 98mm while the lower cubby has a clear height of approx. 156mm.
6 TROUSER PULL-OUT ES
An additional low-cost but attractive option for hanging up pants in your closet. Attachment to the underneath of a shelf. Can accommodate 9 pairs of pants. Made of steel, chrome-plated and polished. “The distance between the lower edge of the shelf and the upper edge of the trouser pull-out is approx. 60 mm.
7 TROUSER PULL-OUT WITH FRONT COVER
The width of this trouser pull-out can be adjusted to suit your individual requirements between 500mm and 1000mm. The stable aluminum frame can hold up to 13 pants (at max. width) and comes with a front facing in matching material. The front cover of the trouser pull-out can be turned to allow a choice of a 3mm or 5mm gap alignment.
8 PURSE HOOK
The purse hook allows bags to be stored securely on clothes rods. Hanging storage prevents bags from being damaged in any way.
9 HOLDER FOR HOSE OF VACCUM CLEANER
A popular accessory for a functional broom cupboard. The holder can accommodate a vacuum cleaner hose and can be screwed on. Material: steel, plastic-coated.
10 WIRE BASKET INCL. RUNNERS
Available in 2 different sizes and 2 surfaces (white and silver). Mounting sizes, width × depth: 448mm × 450mm.
11 ANGLED SHELVES WITH EDGING
The shelves are installed at a 15° angle and have a front edging (68mm). An optional
center strip is also available for the shelf.
12 PULL-OUT WARDROBE HOLDER
The wardrobe holder is made of steel with a silver lacquered surface. The load bearing capacity is 15kg. Field width at least 490 mm wide.
13 PULL-OUT SWIVEL MIRROR
A useful pull-out and swivel mirror with minimum space requirements. Available in 2
different heights, 600mm and 1400mm. The mounting depth is 480mm. Not possible in combination with gallery lighting or hinge doors.
14 HOOK RAIL
A further practical accessory that keeps the closet neat and tidy. The rail can accommodate up to 5 brushes, towel.
15 DRAWERS
The drawer is mounted below a shelf with traverse. This is not included in shipment
and must be ordered separately. The drawer features a soft stop, tilt protection that holds the shelf in place and a front panel (115mm) to match the shelf material that is the same width as the shelf. The drawer has a frame height of 77mm.
16 PULL-OUT CLOTHES ROD
This clothes rod is inserted in the shelf and is supplied preassembled. It has a maximum load capacity of 5kg. 20mm projection, 96mm when pulled out. Not in combination with shelf lighting.
17 ALUMINUM FRAME GRASS SHELF LED (25MM)
An LED strip is integrated into the aluminum frame glass shelf. It is located in the front section and provides indirect light to the rear. The tempered safety glass panel lies loosely on the frame. Can be combined with the clothes rod. A combination with an illuminated clothes rod is not possible.
18 PULL-OUT SHELF
Practical addition, manufactured from the same material as the interior system. Full extensions ensure sufficient usable depth. Suitable for use of an extendable surface (for the storage of shoes, for example). height with front cover approx. 68mm. Minimum depth interior system 385mm. Maximum load capacity 15 kg.
19 PULL-OUT SHOE RACK
Space saving solution, enables storage of shoes on 3 or 5 levels. The fact that the shoe racks are height-adjustable means that it is also possible to store boots as well as shoes. Required mounting depth: at least 525mm.